[Jukebox-list] What value is the volume control used on an AMI'i'?

[Nimko Lodewijk-Original Jukebox Company]

I always use a 22K log and that works fine. When you modify the amp a bit 
then there is no cracking sound anymore..

Thanks,Nimko

----- Original Message ----- 
From: "Juke of Shrewsbury" <jukeofshrewsbury at tiscali.co.uk>
To: "Jukebox mailing list" <jukebox-list at lists.netlojix.com>
Sent: Wednesday, August 09, 2006 9:02 AM
Subject: Re: [Jukebox-list] What value is the volume control used on an 
AMI'i'?


> Paul,
> It's actually a 35K pot, but used just as a variable resistor so a 47K 
> would be OK. If you are worried about audio noise when the pot is 
> turned.... a new pot may not make much difference! The design of the amp 
> is such that moving the pot always causes some noise on the audio.
>
> Adrian.
>
> ----- Original Message ----- 
> From: "Paul Taylor" <paul.taylor at georgestreetpress.co.uk>
> To: <jukebox-list at lists.netlojix.com>
> Sent: Tuesday, August 08, 2006 8:01 AM
> Subject: [Jukebox-list] What value is the volume control used on an AMI 
> 'i'?
>
>
>> What value is the volume control used on an AMI model 'i' - also, is  it 
>> linear or logarithmic? Thanks for any responses.
>> _______________________________________________
>> Jukebox-list mailing list
>> Jukebox-list at lists.netlojix.com
>> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>>
>>
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.1.394 / Virus Database: 268.10.7/409 - Release Date: 
>> 04/08/2006
>>
>>
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.10.7/409 - Release Date: 4-8-2006
>
>