[Jukebox-list] Seeburg Switch Contacts

Tony Miller seeburgt at pacbell.net
Sun Dec 3 10:55:51 PST 2006


At 08:50 PM 12/2/2006, you wrote:
>My question is, just how much voltage and current is being switched here?
>If there is a circuit problem, is it possible that one of these switch
>contacts will get "cooked"?  I have two that have darkened metal on the
>contacts, and they seem to not take well to being tweaked into a position to
>make better contact.  I don't know how much current it takes to "set" a
>toroid, but it sure doesn't seem like it would be enough to darken and
>remove the springiness from a slide-switch contact, does it?  I may need to
>look into getting another switch-bank from somewhere...

Bob;

For this machine, it's a 150-pulse at about 1.8 Amps.

Cheers,

Tony Miller

>--Bob
>=======================================================================
>Bob Ellingson                                   bobe at halted.com
>Halted Specialties Co., Inc.                    http://www.halted.com
>3500 Ryder St.                                  (408) 732-1573
>Santa Clara, Calif. 95051  USA                  (408) 732-6428 (FAX)
>
>_______________________________________________
>Jukebox-list mailing list
>Jukebox-list at lists.netlojix.com
>http://lists.netlojix.com/mailman/listinfo/jukebox-list




More information about the Jukebox-list mailing list