[Jukebox-list] Seeburg Mechanism Lubrication

[Dieterle, Jeff R.]

Never felt like I was getting all the lube points with the mechanism in
the cabinet, so I wicked up a spare mechanical plug with 120vac on the 2
motor terminals, pull the mechanism and lube it on the bench. Doing that
allows the mechanism to scan and gives a little better access.

-----Original Message-----
From: Joey McDonald [mailto:joe400f at shaw.ca] 
Sent: Tuesday, December 19, 2006 10:35 PM
To: Jukebox mailing list
Subject: [Jukebox-list] Seeburg Mechanism Lubrication

Here is a tip I found usefull in lubing the "selectomatic 100
mechanism".

Standing in front and looking at your juke, remove the right
magazine housing. This is the big end cap of the record rack.

Run the mech to the right side just before the reversing switch
runs the mech back to the left using the manual scan switch.

You can now access all the lube points on the back of the
mechanism with a Zoom spout oiler. No problem.

Hope this helps the newbies and lesser experienced.
Also, buy Ron's book. 
Am I allowed to say Buy Ron's Book?
I guess I just said, buy Ron's book.


Joey McDonald