[Jukebox-list] AMI A selector banks

[John Lee]

Hi Brad:
         If you remove the five screws on the bottom (between and next to 
the four sockets) you can separate the coil bank from the pot metal lever 
assembly. I did this on my A and C, and dipped the pot metal lever assembly 
in carburetor dip. Rinse with water and then use lacquer thinner (or 
solvent) and a brush to finish up (also helps to reduce the smell of the 
carb cleaner slightly) The parts may smell bad for a couple days, but come 
out looking like new.
         Of course, once it's apart, you could also use your favorite 
degreaser.

At 07:56 AM 7/29/06, you wrote:
>I am doing an AMI A and have taken apart the mech to degrease. Anyone have a
>suggestion of how to clean the banks of selector fingers? I don't want to
>get them real wet because of the solenoids. They are pretty greasy! Thanks,
>Brad
>________________________________________
>When replying to this message, kindly
>COPY and PASTE THIS MESSAGE into the
>body of yours for reference. Then we can
>keep track of the conversation!
>
>THANK YOU!
>
>
>
>_______________________________________________
>Jukebox-list mailing list
>Jukebox-list at lists.netlojix.com
>http://lists.netlojix.com/mailman/listinfo/jukebox-list