[Jukebox-list] Remote volume

[Don Tutt]

Dan and Vickie,
Senior voices will probably confirm what I am saying.... The volume control 
is in a low voltage audio circuit that is sensitive to picking up "noise" 
from EMF feilds. The longer you make the wires in the pot feild the more 
likely those wire will pick up noise that will show up in the music.
Hence the way to go as long as you want the volume of the music controlled 
from a distance, AND you are using a pot to do it is to have a servo motor 
circuit.
Regards,
Don


----- Original Message ----- 
From: "Dan and Vickie Robinson" <panther at mei.ws>
To: <jukebox-list at lists.netlojix.com>
Sent: Saturday, June 03, 2006 12:31 PM
Subject: [Jukebox-list] Remote volume


Can anyone expalin why Seeburg went from a remote volume, with the Volume 
Potentiometer located in the remote control, to the motorized more recent 
type. It would seem logical, and much more cost effective to mount the 
Poteniometer remotely?
Think about what it takes to control the pot remotely, compared to the pot 
being remote.
Dan
_______________________________________________
Jukebox-list mailing list
Jukebox-list at lists.netlojix.com
http://lists.netlojix.com/mailman/listinfo/jukebox-list