[Jukebox-list] Wurlitzer 1900 Selection Problem

[Peter Brown]

If you don't like it why did you sign up?  The rest of us seem to like and 
appreciate the list and do not find it annoying in the least.


----- Original Message ----- 
From: "Travel Time" <travel_time at hotmail.com>
To: <jukebox-list at lists.netlojix.com>
Sent: Wednesday, June 14, 2006 9:42 AM
Subject: RE: [Jukebox-list] Wurlitzer 1900 Selection Problem


> Please take me off this list..this is a business and most anoying.....
>
> thank you
>
>
>>From: mark.biskowitz at effem.com
>>Reply-To: Jukebox mailing list <jukebox-list at lists.netlojix.com>
>>To: jukebox-list at lists.netlojix.com
>>Subject: [Jukebox-list] Wurlitzer 1900 Selection Problem
>>Date: Wed, 14 Jun 2006 07:34:05 -0400
>>
>>I am hoping someone might be able to help.  I am in the process of
>>restoring a Wurlitzer 1900.   This model has 104 Selections - 4 letters
>>(A, B, C, D) x 26 numbers (1-26).
>>
>>Problem I'm Having:
>>
>>Whenever I make any A or C selection it works perfectly (from beginning to
>>end - right pin pops up and selects right record).
>>
>>Whenever I make any B or D selection, I get the A-Selection (with the
>>appropriate number).
>>
>>Examples:
>>
>>Select A15 = get A15
>>Select C23 = get C23
>>Select B8 = get A8        (A8 pin pops up not B8)
>>Select D13 = get A13    (A13 pin pops ups not D13)
>>
>>I think I have a basic understanding of what is supposed to happen when
>>selection is made:
>>
>>When select A button:  no circuit to operating components, rotating plate
>>/ rocker assembly stays put and A selection is made
>>
>>When B or C selected:  Circuit should energize Stop Magnet B or C and
>>driver solenoid, actuate stop arm B or C, and the rotating plate / rocker
>>assembly will shift (until it hits Stop Magnet) so right selection is
>>made.
>>
>>When D selected:  it appears there is no stop magnet / arm but the driver
>>solenoid only and the rotating plate / rocker will travel full distance it
>>has to in order to be aligned with D Pins.  .
>>
>>Since C works perfectly it appears that at least its circuit is getting
>>energized and its stop magnet and the drive solenoid work properly.
>>
>>However ,consistent with B or D not selecting properly, when I observe the
>>rotating plate I see that it is not moving or shifting (like with C
>>selection).
>>
>>Therefore, although I see what is happening I'm at a loss as to what I
>>need to do to troubleshoot the B and D selections.    As mentioned, I'm
>>trying to fix this up so I have never seen it work properly.
>>
>>Any advice or suggestions would be greatly appreciated.
>>
>>Thanks
>>
>>Mark
>>_______________________________________________
>>Jukebox-list mailing list
>>Jukebox-list at lists.netlojix.com
>>http://lists.netlojix.com/mailman/listinfo/jukebox-list
>
> _________________________________________________________________
> Don't just search. Find. Check out the new MSN Search! 
> http://search.msn.click-url.com/go/onm00200636ave/direct/01/
>
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>