[Jukebox-list] AMI JAH 200 and JBH 120

[Karl]

Actually, I have a problem applying schematics to things with no circuit
boards......the haphazard bouncing around of components seems to give me a
mental block.  But I thank you Wes......your point may just be the ticket to
help me through it.

Karl
Columbus Coin-Op Shop
2061 S. Lumpkin Rd
Columbus, GA 31903
Shop (706) 507-2963
----- Original Message ----- 
From: "Karl" <karlh44 at knology.net>
To: "Jukebox mailing list" <jukebox-list at lists.netlojix.com>
Sent: Thursday, July 27, 2006 10:43 PM
Subject: Re: [Jukebox-list] AMI JAH 200 and JBH 120


> I'll try to approach it from that viewpoint. I have very little experience
> with tube anything's so I'm a little dumber than usual on this amp.
>
> Karl
> Columbus Coin-Op Shop
> 2061 S. Lumpkin Rd
> Columbus, GA 31903
> Shop (706) 507-2963
> ----- Original Message ----- 
> From: "Wesley Dean" <wesleydean at cox.net>
> To: "Jukebox mailing list" <jukebox-list at lists.netlojix.com>
> Sent: Tuesday, June 27, 2006 3:16 PM
> Subject: Re: [Jukebox-list] AMI JAH 200 and JBH 120
>
>
> >     Karl, the amplifier with the extra socket and jumper plug is to
> > accommodate an ALC outboard unit. With the jumper plug installed, the
> > circuits are basically the same on both amplifiers. Wes
> >
> > _______________________________________________
> > Jukebox-list mailing list
> > Jukebox-list at lists.netlojix.com
> > http://lists.netlojix.com/mailman/listinfo/jukebox-list
> >
>
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>