[Jukebox-list] 222 mech problems still

[Rick Force]

Hi Ron,
No, that cap is not on this one. Thank you, Rick.


>From: Ron Rich <ronnnrich at yahoo.com>
>Reply-To: Jukebox mailing list <jukebox-list at lists.netlojix.com>
>To: Jukebox mailing list <jukebox-list at lists.netlojix.com>
>Subject: Re: [Jukebox-list] 222 mech problems still
>Date: Thu, 25 May 2006 07:42:44 -0700 (PDT)
>
>Rick,
>   Is there still a small cap connected to the motor wires (on the 
>terminals up front where the motor wires connect)? If so, cut it off ! (you 
>don't need it). Ron Rich
>
>Rick Force <flashbk13 at hotmail.com> wrote:
>   Hi all,
>After replacing the motor cap, that didn't help at all, so I replaced the 
>motor as well (pulled from another 222). now, it only scans to the right, 
>left is dead. I reversed the wires on the motor and it went left but not 
>right and got a very large arc at the reversing sw when I changed that sw 
>to the other side. I could only get a reading on the motor windings in the 
>200,000 range (motor disconnected at that time) and both windings read 
>180kohms? I again measured the ac at the terminal strip and got 117 at 
>both. I have no idea what's wrong here. Also when I tripped a record to 
>play, it played too slow. Any suggestions? Did that first motor take out 
>the new $30 cap? Thank you, Rick.
>_______________________________________________
>Jukebox-list mailing list
>Jukebox-list at lists.netlojix.com
>http://lists.netlojix.com/mailman/listinfo/jukebox-list
>
>
>
>---------------------------------
>Sneak preview the  all-new Yahoo.com. It's not radically different. Just 
>radically better.
>_______________________________________________
>Jukebox-list mailing list
>Jukebox-list at lists.netlojix.com
>http://lists.netlojix.com/mailman/listinfo/jukebox-list