[Jukebox-list] Seeburg LS2

[Wesley Dean]

    The screen resistors should be changed to one watt even if the original 
7868 tubes are used. Wes
----- Original Message ----- 
From: <Jjmscf at aol.com>
To: <jukebox-list at lists.netlojix.com>
Cc: <Jjmscf at aol.com>
Sent: Saturday, May 27, 2006 10:49 AM
Subject: Re: [Jukebox-list] Seeburg LS2


> Any changes to the circuitry neccessary?6V6 I got and I probably have the
> sockets somewhere.Hopefully the output trannys are good.The tube shows no 
> signs
> of overheating.More than likely someone accidentally cracked it while the 
> door
> was open as there's one of the smaller tubes on the preamp broke too.
>
> J.C.
>
>
> In a message dated 5/27/2006 10:11:47 AM Eastern Standard Time,
> wesleydean at cox.net writes:
>>JC, its a fairly simple matter to change the 7868 tubes to the more
>>economical 6V6. All you need is four octal sockets. Wes
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list