[Jukebox-list] Wurlitzer 2810 Scan Problem...I Think!?!

[Retro Depot]

Hello all,
This box had the following problem, if selections containing numbers 1 thru 5 were made, ( i.e. C3, A1, E5), no problem, it would play those selections. Whenever selections containing 6 thru 0 were made, you could hear the selector pin assembly line up to the appropriate trip pin, but the coil would not energize and the scan motor would not engage or even make an attempt to. If I manually "tripped" the A7 lever, it would start scanning and pick up normally and play just as well as the other 'keyboard' selected pins, (the aforementioned numbers preceding 6).
Here's the kicker, I've been checking connections, un-plugging then re-seating, wiggling those relays, even replacing them with known good ones from an Americana 2, and cleaned keyboard switches. It's now not scaning for any selection. Just as I thought I was doing it a favor, it took a dump on me. I must admit that Wurlitzers are my weakness now, but I am very capable with the other major three. This must be my third Wurly. Any help is very much appreciated....help.
Cheers, Steve