[Jukebox-list] 222 side glass removal

[dirksenj at bellsouth.net]

There are three or four screws you must remove from the inside along the top 
side. The top most aluminum trim piece holding the glass will then slide out 
towards the front of the machine. You can then lift the glass up and out.

Jim
----- Original Message ----- 
From: "Ron Rich" <ronnnrich at yahoo.com>
To: "Jukebox mailing list" <jukebox-list at lists.netlojix.com>
Sent: Wednesday, November 08, 2006 11:02 AM
Subject: Re: [Jukebox-list] 222 side glass removal


> Rick,
>  It's been awhile, but I think what you have "done wrong" is to remove all 
> the screws on the back. If I remember correctly, that glass comes out from 
> the "top-front".  Just lift and wiggle it towards the front of the cabinet 
> (stand as if you were making a selection, and pull the glass up and out). 
> The new glass goes in, bottom first. There is one thing that I clearly 
> remember--it MUST have a plastic frame on ALL sides of the glass, or it 
> will split, or rattle, when you re-install the top frame (see the parts 
> book for an illustration). Ron Rich
>
> gibson510 at charter.net wrote:
>  I'm trying to remove a broken right side glass on a 222 i just picked up. 
> I removed the screws from the top trim piece and all down the back right 
> side but it doesn't seem to want to budge. I don't want to pry on the trim 
> and damage it. What am i doing wrong here??
> Thanks
>
> Rick
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>
>
>
> ---------------------------------
> Sponsored Link
>
> Talk more and pay less. Vonage can save you up to $300 a year on your 
> phone bill. Sign up now.
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>