[Jukebox-list] Connecting wallbox to AMI K & Continentalsl

[Graeme Harvey]

I have both parts of the stepper.    
Graeme Harvey
----- Original Message ----- 
From: "Marc W. Howard" <marc.howard at ieee.org>
To: "Jukebox mailing list" <jukebox-list at lists.netlojix.com>
Sent: Monday, November 13, 2006 6:28 PM
Subject: Re: [Jukebox-list] Connecting wallbox to AMI K & Continentalsl


> Graeme Harvey wrote:
> 
>> G'day Marc,
>> I would appreciate a copy of the Manuel.   Send to me off list.    
>> Thanks.
>> I have a manual for the "K" showing a  stepper behind the selection 
>> buttons.
>> I have an Australian built "K" with no stepper.     I have seen maybe 
>> 8 of these with no stepper.      It must have been an "extra"  on the 
>> Australian built "K".
>> The manuel shows a separate part number.    Would a stepper from a 
>> Continental work.    I have one of these.
>> Graeme Harvey
>>
> Graeme,
> 
> I sent you the manual in a separate email.
> 
> As for your question: I don't really know.  I wouldn't be surprised if 
> the K stepper and CCA weren't electrically similar.
> 
> You should be aware that theCCx steppers actually have two boxes.  One 
> the called the relay unit and the other is called the stepper.  There 
> are two versions of each of these.  Two relay unit designs (for AMI or 
> Seeburg wallboxes) and two steppers (100 or 200 selection jukeboxes).  
> Thus the four models.  The CCA is for AMI 200 selection wallboxes.
> 
> A lot of times you'll see ebay auctions for one half of a stepper pair.  
> You must have both units to make it work.
> 
> Marc
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list