[Jukebox-list] Need help with Rowe-AMI TI-1 fuse replacement

[Wesley Dean]

    Ron, the projector I was exposed to had a spring that pulled the two rods together and current coil in the circuit to one rod that pulled them apart. Feedback control. Wes
----- Original Message ----- 
From: "Ron" <tracron at bigpond.net.au>
To: "Jukebox mailing list" <jukebox-list at lists.netlojix.com>
Sent: Saturday, November 18, 2006 5:54 PM
Subject: Re: [Jukebox-list] Need help with Rowe-AMI TI-1 fuse replacement


> The magnets in the carbon arc lamps are used to keep the rods together after 
> the initial setting. As they burn shorter the magnet assemblies pull them in 
> so a to keep the correct distance.
> Ron fron OZ
> ----- Original Message ----- 
> From: "Ron Rich" <ronnnrich at yahoo.com>
> To: "Jukebox mailing list" <jukebox-list at lists.netlojix.com>
> Sent: Sunday, November 19, 2006 9:48 AM
> Subject: Re: [Jukebox-list] Need help with Rowe-AMI TI-1 fuse replacement
>