[Jukebox-list] Wurlitzer 2600

[Wesley Dean]

    Karl, your reversing relay is not pulling in. The micro switch on the crank arm operates this relay through the two slip rings. This is a trouble spot on all Wurlitzers after the 2204 series. Wes. 
----- Original Message ----- 
From: "Karl" <karlh44 at knology.net>
To: "Jukebox mailing list" <jukebox-list at lists.netlojix.com>
Sent: Thursday, November 23, 2006 12:48 AM
Subject: Re: [Jukebox-list] Wurlitzer 2600


> Wes,
> I think that part is working ok........I have the problem where the crank
> arm runs into the pin and tries to bend it because the motor is not
> reversing.....I assume, if I understand the sequence correctly, that either
> the carriage switch or the reversing relay is not working. I've not had a
> chance to get back to it to check further but I think I read that the
> reversing relay is in the junction box. I sure do appreciate your help.
> 
> Karl
> Columbus Coin-Op Shop
> 2061 S. Lumpkin Rd
> Columbus, GA 31903
> Shop (706) 507-2963