[Jukebox-list] Wes's brilliant idea

[Wesley Dean]

    Bob, you must have access to the wiring side of the fuse holder. Wes 
----- Original Message ----- 
From: "NotarySojac" <notarysojac at sbcglobal.net>
To: "Jukebox_List" <jukebox-list at lists.netlojix.com>
Sent: Wednesday, November 22, 2006 6:15 PM
Subject: [Jukebox-list] Wes's brilliant idea


Brilliant idea, Wes! No pun intended.
Maybe I'm missing something, however. These fuses are held in place with a little bayonet cap on one end. How do you attache the wire ends across the fuse holder in this case?
Bob
P.S. No reply necessary until after you have had your turkey dinner.

Wes said:
Bob, if you have deep pockets, go ahead and keep on blowing expensive fuses. But I, being close of coin devised a way to monitor the short circuit without blowing fuses. Acquire a lamp of like voltage of the circuit to be checked.  This lamp may be as large as the fuse rating. Solder two small wires on the lamp and attach the other ends of the wires across the fuse holder. Now instead of blowing fuses, the short will only illuminate the lamp to full brilliance. Now you can poke around looking for the short ay your leisure. Wes
_______________________________________________
Jukebox-list mailing list
Jukebox-list at lists.netlojix.com
http://lists.netlojix.com/mailman/listinfo/jukebox-list