[Jukebox-list] Visit from Georgia

[Jjmscf at aol.com]

The PA Game room show is from October 20-22. I will be going on Sunday,my  
only day off from work. 
 
As for your 2410 I wonder about the carriage switch in the mechanism.  it is 
a microswitch and they go bad. It should  be closed when it stops on  the pin. 
Check it with your meter.It should show zero ohms or very close when  
closed.If not it's no good. It activates a reversing relay underneath  that should 
reverse the motor direction to start the transfer cycle.This is all  assuming 
the 2410 mechanism is the same as the 2510. The 2510 did that  once so it's 
microswitch may be getting flaky too.
 
J.C.
 
 
 
In a message dated 10/1/2006 3:20:50 P.M. Eastern Standard Time,  
etreble7 at comcast.net writes:

>Hi  J.C.,
>I am 15 min. from Annapolis, off Rt. 450.  It would be great  to meet you, 
>you are always welcome!  When is that?

>As  far as the 2410 working, I did not ask Roy to work on my machine.  He 
was  
>just stopping by to drop off a part and to meet me and my Jukeboxes,  LOL  I 
>will have to work out the 2410 myself and with the help of  the list.  He 
did 
>offer to take it back to Georgia and do a  "make-over" which was a great 
>offer but I was short the $$ to take him  up on it.

>I am hopeful on the repairs though, if I pull a pin, it  rotates but runs 
>into the pulled pin and does not stop or cancel the  pin.  I have to turn it 
>off quickly and manually pull back the  ??? (have to look up the name of 
that 
>part) and cancel the pin  manually.  That is better than no action at all!! 
>I put on new  motor mounts and put on the new turntable motor belt, yea!!!  
I  
>really don't think there is "that" much wrong with the 2410, but for  me 
it's 
>like climbing Mt. Everest!

>Please feel free to stop  by, contact me off list for directions and phone 
#, 
>would love to see  you.
>Jackie