[Jukebox-list] Visit from Georgia

[Jackie]

J.C.
Yes, you are correct, I would love to go!!  Checking my calendar, I think we 
might be able to make it.  Of course, lots can change around here between 
now and then, lol  I would just love to look around, not in a position right 
now to shop.

  My focus is getting my 2410 running.  There are a couple people I can call 
that I think can help me out and they are fair and reasonably priced.  I 
will continue to do and learn what I can and save up.  Wes has been more 
than helpful and generous with his time.  I am making some headway, it's 
just slow.

I will contact you off list with details of the Gameroom Show, maybe we 
could hook up for breakfast if we all go on the same day.
Jackie
----- Original Message ----- 
From: <Jjmscf at aol.com>
To: <jukebox-list at lists.netlojix.com>
Cc: <Jjmscf at aol.com>
Sent: Sunday, October 01, 2006 6:00 PM
Subject: Re: [Jukebox-list] Visit from Georgia


>
> When I tell you about the show you'll probably want to go too. There's
> jukeboxes,pinball machines,video games,slot machines,neon signs,records 
> for sale
> and other neat stuff. Charlie is usually there selling Always Jukin' books 
> and
> cds.
>
> It should activate the microswich I mentioned when it hits the pin.  This
> activates a reversing relay and the motor is supposed to start turning in 
> the
> opposite direction which is the transfer cycle. Look for it  inside of 
> the
> area of the pins. It spins along with the selector crank. Should be shown 
> in
> your manual.
>
> J.C.
>
>
> In a message dated 10/1/2006 5:23:56 P.M. Eastern Standard Time,
> etreble7 at comcast.net writes:
>
>>J.C.
>>what do you do there at the Game Room?     what are the hours of the PA 
>>Game
>>Room event?  That is probably  about a 2-3 hr. drive from my house to PA,
> not
>>far from my Daughter in  East Berlin, PA.   Of course it is fine if you 
>>come
>>by, you  almost have to pass by my house!!
>
>>As for the microswitch, I am not  sure where it is, I will have to look in
>>the manual, but the mech does  not stop, it just plows into the pin and 
>>gets
>>hung up on it.   There are a couple that are bent because of it.  Looks 
>>like
>>that  was an issue before I picked it up.  I haven't let it get hung up on
>>it, I turn off the machine and cancel it manually right before it hits 
>>the
>>pin.  I just want to watch it work..............ha! for a  moment or two,
> lol
>>What makesthe mech stop when it hits the pin?   That's what I think is not
>>working.
>>Jackie
>
>
>
>
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list