[Jukebox-list] Seeburg SS160 Front Glass

[Ron Rich]

P.S. If that glass was "glued in", you must remove ALL the old glue, and be sure that the frame is not bent--that foam is 3/8 in wide, 3/16 in thick--and it must cover every last bit of the glass--on both sides and all of the exposed edge, or the glass will brake as soon as you insert it into the juke--I don't recall the side glass, but I assume it is the same?--Ron Rich

Ron Rich <ronnnrich at yahoo.com> wrote:  I have used the "sort" 1/8 "pop rivits" with no problem.--Hint: be sure that you use foam (weather-strip) tape to insulate the glass from the metal. Ron Rich

JHayes2613 at aol.com wrote: Hey, everyone-
Can someone shed some light on replacing the front glass? Bought a set of 
repros and need to know what size rivets are needed for putting the frame back 
together. Any hazards to watch out for...? Are the same size rivets used in the 
side frames as well?
Thanks!
-j





-------------------------
check me out on the web!
www.johnhayesillustration.com
_______________________________________________
Jukebox-list mailing list
Jukebox-list at lists.netlojix.com
http://lists.netlojix.com/mailman/listinfo/jukebox-list



---------------------------------
How low will we go? Check out Yahoo! Messenger’s low PC-to-Phone call rates.
_______________________________________________
Jukebox-list mailing list
Jukebox-list at lists.netlojix.com
http://lists.netlojix.com/mailman/listinfo/jukebox-list


 		
---------------------------------
Stay in the know. Pulse on the new Yahoo.com.  Check it out.