[Jukebox-list] Seeburg TSU5 question

[Chris Manuel]

Hi all-

Finally getting to put together my Seeburg AY.  The amp is recapped and
sounding great, but I'm still having problems with the selector unit.

I have recapped this as well-and at least I don't feel so bad that it didn't
work right away.  It was only good for 1 or 2 selections before the rebuild.

It does the scan twice and stop.  I went through the troubleshooting and got
to section "M" where you jumper A & B while scanning to make it select.  It
does, and it ejects properly too.

What I have noticed is that I also hear the solenoids buzzing when it hits
the home position. I can make this stop by pulling the J501 mechanism plug.

The 12AX7 on the pulse amp is fresh and known working, and the OA2's are
also purple.  I have also disconnected the album unit.

I'm suspecting I have maybe a couple of problems.  Any thoughts where to
turn first?

Thanks in advance-
Chris