[Jukebox-list] LPC1 amplifier rebuild.Do the mylars need replacing.

[Ron Rich]

JC,
  The LPC-1 phono was not designed for "hi's"--unless the  optional "DS" speakers were installed. If you are getting them, you are lucky ! You might try "messing with" the "low volume base boost" circuit on the volume control. Ron Rich

Jjmscf at aol.com wrote:
  
Thanks for the info on the speakers.Looks like recone is the way to go to 
get non rattling woofers.Kinda hate how the highs aren't crisp until I crank 
the volume.I got the treble all the way up and the record quality compensator 
on minimum.The highs are nice and crisp at the higher volume but at low volume 
it sounds muddy.Since a TSA4 amp sounds about the same any suggestions?I 
don't think the high frequency speakers would be bad would they?Maybe crossover 
caps?

J.C.

In a message dated 9/4/2006 10:25:33 P.M. Eastern Standard Time, 
ronnnrich at yahoo.com writes:

>Just a hint--the original TSA-1/3 amps and speakers are 16 
ohm--replacements are >hard to find--I suggest a re-cone job. (TSA-4's up are 5 ohm) Ron Rich




_______________________________________________
Jukebox-list mailing list
Jukebox-list at lists.netlojix.com
http://lists.netlojix.com/mailman/listinfo/jukebox-list


 		
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls.  Great rates starting at 1¢/min.