[Jukebox-list] Seeburg C not cancelling pins - A side only

[Aaron's Email]

Ron,
That was IT!!!! The brass sleeve was out almost 1/4" further than it should
have been. I had to remove the coil from the contact block to get it pushed
back in through the mounting framework, but once I did that, I pushed the
sleeve to where it need to be, remounted the coil, then set a final depth of
the sleeve right to the contact block itself. From there, it was fine tuning
the SC and C switches until it canceled everything in sight. In fact, it's
working so well that it's cancelling pins on my Trashcan which is located
right across from the C!! :)

Thanks for all your help. The very best!!!

A.