[Jukebox-list] Seeburg C not cancelling pins - A side only - FIXED!

[Ron Rich]

Aaron,
  I mount them on the front switchplate of the mech--in the area where the .01 cap was. The one fuse covers both cancel coils and the pop meter coil. Electrically, it goes in series with the common wire that goes to the reversing switch, and then on to the RC/LC thru the rev. switch. Ron Rich

Aaron Heverin <aaron at vertasource.com> wrote:
  Ron,

I'm going to put that fuse in this evening. I'm just curious as to where to mount it. There's not a ton of room at the contact block - obviously...so did you just tap into the wires coming from the mech itself down to the coils on the contact block? Did you use one 1/4 amp fuse for each coil? 

Aaron


Aaron Heverin
_______________________________________________
Jukebox-list mailing list
Jukebox-list at lists.netlojix.com
http://lists.netlojix.com/mailman/listinfo/jukebox-list


 
---------------------------------
8:00? 8:25? 8:40?  Find a flick in no time
 with theYahoo! Search movie showtime shortcut.