[Jukebox-list] Advice before I take apart AMI G transfer motor.

[Mechanical Music of S.F.]

Soooo..., I took the mech out of my AMI G120 to give it, and the cabinet 
interior, a good surface cleaning.
I think I must have gotten some water in the transfer motor as now it's 
sluggish, like the lube is gummed up, or the brushes are contaminated.
Anyone who's ever gotten their hands wet after having played in oil and 
grease knows what I'm talking about.

OK, anything I should know before I take it apart to clean it out?  I 
noticed an allen screw at one end of the shaft motor and a flat heat screw 
at the same end.  I suppose that's a bearing adjustment. Anything I need to 
be aware of down there, like removing or loosening the allen screw?

Darn thing worked OK before.  I removed the motor and let it run, but it 
comes and goes. Thought letting it run for a while with no load would clear 
it up, but although it's a little better, it's definitely gummy.


Kyle ~
Mechanical Music of San Francisco

_________________________________________________________________
5.5%* 30 year fixed mortgage rate. Good credit refinance. Up to 5 free 
quotes - *Terms 
https://www2.nextag.com/goto.jsp?product=100000035&url=%2fst.jsp&tm=y&search=mortgage_text_links_88_h2a5d&s=4056&p=5117&disc=y&vers=910