[Jukebox-list] Animation Motor Rockola 437

[Jackie]

Thanks Ron,
I took the old motor off this morning and once again oiled it.  I also tried 
to take out the set screw, but it wouldn't budge (wanted to look inside) 
With some force on the shank, I can get it to spin in (clockwise) or at 
least I can hear it inside.

It's wiring is bundled with the ballast for the floresent bulb, and that is 
working so I am pretty sure it's getting electricity.

The motor is 110v 60cy 8rpm, so far I haven't found the exact on the 
internet, my question, is there another replacement motor with different 
specs that could work?  As always, thanks for your thoughts,
Jackie

----- Original Message ----- 
From: "Ron Rich" <ronnnrich at yahoo.com>
To: "Jukebox mailing list" <jukebox-list at lists.netlojix.com>
Sent: Monday, April 02, 2007 10:35 PM
Subject: Re: [Jukebox-list] Animation Motor Rockola 437


> Jackie,
>  Easy answer--if it looks like it, check rotation direction, speed, and 
> shaft size--if it's the same, it's it !  Ron Rich
>
> Jackie <etreble7 at verizon.net> wrote:
>  Hi,
> would anyone know if the timing motor in the link below would work with 
> the Rockola 437 as a replacement for the animation motor? Just poking 
> around,
> http://www.herbach.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=HAR&Product_Code=H1-08
> Thanks for any thoughts,
> Jackie
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>
>
>
> ---------------------------------
> Need Mail bonding?
> Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list