[Jukebox-list] Animation Motor Rockola 437

[Jackie]

Ron,
here is all the info on the motor itself:

Synchron Motor USA
630
110V 60CY 4W 8
KJ74RD   5-6-7-81

There is no CW or CCW anywhere on the motor or the mount that it was 
attached to.  As far as the screw, I really don't know if it's a screw or a 
rollpin.  My manual is with the amp so I have no reference at the moment.
Jackie

----- Original Message ----- 
From: "Ron Rich" <ronnnrich at yahoo.com>
To: "Jukebox mailing list" <jukebox-list at lists.netlojix.com>
Sent: Tuesday, April 03, 2007 11:11 AM
Subject: Re: [Jukebox-list] Animation Motor Rockola 437


> Jackie,
>  You are welcome---does it have the letters "CW" or "CCW" on it--if so, 
> that stands for the direction (clock-wise--counter clock-wise). Or perhaps 
> the parts book defines the direction? If you attempt to spin it with the 
> power on, it MAY turn a few revolutions in the correct direction--won't in 
> reverse. If the shaft size and direction is OK--the difference between an 
> 8 rpm and a 10 rpm won't ( in my opinion) ever be noticed.
>  Are you sure that that's a "screw" you are trying to remove--sometimes a 
> "rollpin" is used-- Ron Rich
>
> Jackie <etreble7 at verizon.net> wrote:
>  Thanks Ron,
> I took the old motor off this morning and once again oiled it. I also 
> tried
> to take out the set screw, but it wouldn't budge (wanted to look inside)
> With some force on the shank, I can get it to spin in (clockwise) or at
> least I can hear it inside.
>
> It's wiring is bundled with the ballast for the floresent bulb, and that 
> is
> working so I am pretty sure it's getting electricity.
>
> The motor is 110v 60cy 8rpm, so far I haven't found the exact on the
> internet, my question, is there another replacement motor with different
> specs that could work? As always, thanks for your thoughts,
> Jackie
>
> ----- Original Message ----- 
> From: "Ron Rich"
> To: "Jukebox mailing list"
> Sent: Monday, April 02, 2007 10:35 PM
> Subject: Re: [Jukebox-list] Animation Motor Rockola 437
>
>
>> Jackie,
>> Easy answer--if it looks like it, check rotation direction, speed, and
>> shaft size--if it's the same, it's it ! Ron Rich
>>
>> Jackie wrote:
>> Hi,
>> would anyone know if the timing motor in the link below would work with
>> the Rockola 437 as a replacement for the animation motor? Just poking
>> around,
>> http://www.herbach.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=HAR&Product_Code=H1-08
>> Thanks for any thoughts,
>> Jackie
>> _______________________________________________
>> Jukebox-list mailing list
>> Jukebox-list at lists.netlojix.com
>> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>>
>>
>>
>> ---------------------------------
>> Need Mail bonding?
>> Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.
>> _______________________________________________
>> Jukebox-list mailing list
>> Jukebox-list at lists.netlojix.com
>> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>
>
>
> ---------------------------------
> Finding fabulous fares is fun.
> Let Yahoo! FareChase search your favorite travel sites to find flight and 
> hotel bargains.
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list