[Jukebox-list] How to remove Rockola 1448 PinBank

[dirksenj at bellsouth.net]

There is a gear or pulley at the front of the mech for the pop meter (at 
least on the 1448). You will have to remove two square head bolts holding 
this to the shaft. Also, the allen screws in the back are pointed on the 
inside end and fit into two grooves on the very end of the shaft - they are 
longer than you think - and if you don't loosen them enough, they will dig 
into the shaft as you remove it (unless you remove the shaft out the front). 
Sometimes I do have to give the shaft a love tap.

Jim
----- Original Message ----- 
From: <wbabbott at cox.net>
To: <jukebox-list at lists.netlojix.com>
Sent: Saturday, April 07, 2007 4:25 PM
Subject: [Jukebox-list] How to remove Rockola 1448 PinBank


>I have a Rockola 1452 Hideaway in poor condition that I'm stripping for 
>parts. This Hidewaway is basically the mechanism of a 1448 in a plain 
>cabinet. I figured that stripping this down would give me a little more 
>insight into the inner working of the 1448.
> My question is about how to remove the pinbank. So far, I have:
> 1. Removed the TT motor assembly and platform.
> 2. Removed the Contact Block holding the Cancel Relays
> 3. Took the back door off and loosened the two allen screws retaining the 
> shaft at the back record wheel.
> The shaft won't move, have I missed something or I wonder if the shaft is 
> frozen and needs some love taps from a hammer?
> Thanks for any replies in advance,
> Britt Abbott
> Chesapeake, VA
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>