[Jukebox-list] Looking for some parts for a few different jukes

[Jens Hultgren]

I,ve seen the MCUs on ebay usually around $80-100....no guarantee they'll
work. A known good chip is then probably worth some $$$€€€.
I also saw a nice complete SMC3 go on ebay for $1 (or maybe it was 10)....

   Jens (writing from Sweden)

On 8/1/07, Gregor Anich <blight at blight.eu.org> wrote:
>
> Hi Ron :)
>
> On Wednesday 01 August 2007 01:23:34 Ron Rich wrote:
> > Hi Backatcha--
> >   Lotts of luck on the MCU for the Seeburg (BTW, a MCU-3, if you can
> find
> > it, will work).
>
> In the last 2 months there have been at least 2 of those units sold in
> Europe,
> one on ebay and one on another site. The one on ebay went for 60 euros and
> the one on the other site for 10 euros. At the moment there is only the
> microcontroller IC available for 125 dollars (!!!) on ebay - thats too
> expensive I think. Maybe it would be possible to replace this unit with a
> custom one? I wonder if the manuals contain enough information to do
> that...
> But that would cost 100 euro at least too I guess....
>
> > Does that SMC have horn or "oval" speakers up top?
>
> It has horn speakers.
>
> > Ditto on
> > the AMi  "blue gear"--just used my last one (replacements were black)--
>
> Damn ;) where did you get those from?
>
> > For
> > the R/O, and all the others, if you wish to look for that stuff in the
> > U.S.--try Wes at wesleydean at cox.net , or John at  www.jukeboxparts.com
>   Ron
> > Rich
>
> Ok, I will do that if noone from Europe replies, thanks a lot for the tip!
>
> >
> > Gregor Anich <blight at blight.eu.org> wrote:
> >   Hi!
> >
> > I am looking for several replacement parts for different jukes.
> >
> > Seeburg SMC1 "Disco":
> > - MCU1 controller unit (only the case was in the juke)
> > - One (or maybe a pair, depending on the price) of the "big" speakers
> > (don't know the part number)
> >
> > Rockola 425 "Grand Prix":
> > - Turntable
> > - One red spring for mechanics suspension
> > - The shaft for the mechanics/record basket (maybe one from other models
> > would fit, but I don't know the dimensions)
> >
> > Rowe AMI TI-1:
> > - Bluish gear which drives the record basket. I made a photo:
> > http://home.pages.at/greg/rowe_ami_ti1_gear.png
> > Some teeth of the original gear are damaged, and it seems to be a
> > non-metric gear. The thing which would come closest (and be available in
> > europe) would probably be a metric gear with 1.26-1.27mm module (maybe
> it
> > is a 0.05 inch one?) but I could only find 1.25mm ones in switzerland
> and I
> > don't know if this company would sell only one gear.
> > Does anybody have such a gear or knows a proper replacement gear?
> >
> >
> > If anybody has exploded drawings for the mech of the Rockola 425 "Grand
> > Prix" juke it would be great if he could send them to me. Someone ripped
> > the mechs apart but except for the turntable and mechanics shaft the
> juke
> > seems to be complete.
> >
> >
> > Thanks,
> > greg
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>



-- 
"There are three sides to every story. My side, your side, and the truth.
And no one is lying."  Bob Evans