[Jukebox-list] Flecking an AMI F or G Series Cabinet

[Aaron's Email]

Sometimes. The "120 Selection" decal was made with a flatbed scanner, but
for the most part, I take a digital picture at 1200 dpi or higher and
completely redraw every bit of it by hand. I either do the redraw... or my
printer does. It depends on how complex the thing is or how much time I have
to do it. The "120 selection" decal was done that way and so was the side
decals for the mech carriage cover. The "Sonoramic Sound" and "Multi-Horn
High Fidelity" decals were done by taking the entire front glass door to my
printer! I also reproduced the coin denomination and "Insert Coin" plasics
for the Wurlitzer 1250.
Aaron.



----- Original Message ----- 
From: "David Breneman" <david_breneman at yahoo.com>
To: "Jukebox mailing list" <jukebox-list at lists.netlojix.com>
Sent: Thursday, February 22, 2007 5:00 PM
Subject: Re: [Jukebox-list] Flecking an AMI F or G Series Cabinet



--- Aaron Heverin <aaron at vertasource.com> wrote:
> The biggest problem is getting a solid original that a new
> template can be made from. Shouldn't be a problem.

The ones on mine are in good shape.  How do you make the
template, use a big flatbed scanner?


David Breneman         david_breneman at yahoo.com



____________________________________________________________________________
________
No need to miss a message. Get email on-the-go
with Yahoo! Mail for Mobile. Get started.
http://mobile.yahoo.com/mail
_______________________________________________
Jukebox-list mailing list
Jukebox-list at lists.netlojix.com
http://lists.netlojix.com/mailman/listinfo/jukebox-list