[Jukebox-list] Seeburg SS-160 lid tweaked and other questions

[Bob E.]

At 10:10 PM 1/8/07 -0800, you wrote:

>
>It looks like the lid assembly has been bent at an obtuse angle where it 
>meets the back/bottom corner of the frame.  

Bent hinge?

>Also, the top animation motor was disconnected long ago, as it and/or 
>the gearbox is noisy and stubborn.  Are replacements available or can 
>this one be serviced?

There is an SS160 being parted out on eBay right now...maybe more than one
(I've seen lots of listings yesterday, and a few days ago in a different 
batch, but I didn't compare to see if it was the same seller). 

I had good luck opening, cleaning lubing and reassembling the clock motor
on my Hamm's sign.

--Bob
=======================================================================
Bob Ellingson					bobe at halted.com
Halted Specialties Co., Inc.			http://www.halted.com
3500 Ryder St.					(408) 732-1573
Santa Clara, Calif. 95051  USA			(408) 732-6428 (FAX)