[Jukebox-list] AMi Pulse conv.

[Karl]

Ron,
Thanks a heap. I like replacing components like that as preventive 
maintenance, otherwise known as headache prevention. I really appreciate 
everyone's help on this. I usually try to steer customers with older 
equipment like this to someone more knowledgeable in the field and, had I 
not discovered this list, probably would have refused this one. As it is 
though, I think I may be able to get through this, with a little amp 
rebuilding from Bill Bickers as well...hehehe. Thanks again everyone and I 
will be sure to let y'all know when I solve the issues or create more...LOL.


Karl
Columbus Coin-Op Shop
Columbus, GA 31903
(706) 507-2963
2061 S. Lumpkin Rd.





Columbus, GA 31903
(706) 507-2963
----- Original Message ----- 
From: "Ron Rich" <ronnnrich at yahoo.com>
To: <jukebox-list at lists.netlojix.com>
Sent: Wednesday, January 10, 2007 1:24 PM
Subject: [Jukebox-list] AMi Pulse conv.


> Karl,
>  My memory works in fits and starts--just remembered the following--
>  There are several caps on the right side of the pulse converter--change 
> them, and while you're at it, check the resistors for tolerance (I think 
> that I have found problems there).
>  Also, on the first relay on the left--there should be a DUAL diode across 
> the coil. I have found that defective many times--and have also found that 
> someone has replaced it with a "standard" diode, more then once. You can 
> use two 1N4004 as a replacement, see schematic Can't recall what symptom 
> it presents when bad---but I think it might be "chatter"--Ron Rich.
>
>
> ---------------------------------
> Everyone is raving about the all-new Yahoo! Mail beta.
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>