[Jukebox-list] AMI TI-1 amp rebuild

[bakerrj2]

I am in the process of rebuilding the amp of my TI-1.  All bad resistors and diodes have been replaced and am currently replacing the caps from a kit that I got from Vern Tisdale.  (Thanks Vern for lableing each cap per the schematic.)  Replacing the caps is pretty straight forward except when it comes to the "can" type filter caps.  I would like to leave the old "cans" in place for appearance purposes and install the new caps below the chassis.  The problem is that there are other terminals besides the caps pos. and neg. leads attached to the existing caps that I am unsure what to do with.  They don't seem to appear on the schematic.
  
Can I attach the new caps to the existing terminals or should I install new terminal strips and move the pos. and neg. leads to these strips?  If so will the other attachment points have to be moved as well?

As you can tell from the above question,  I am a rank rookie in this endeavor.  Any help offered will be greatly appreciated.


Thanks in advance,

Jack