AW: [Jukebox-list] AMI I200 Scan Control

[Stamann]

Hello Jim,

we made those little rubber sleeves a while ago -  they work fine and usually solve the problems you describe.

You find a picture here: http://tinyurl.com/239j36

Kind regrads  -  Oliver Stamann

www.Jukebox-World.de






-----Ursprüngliche Nachricht-----
Von: jukebox-list-bounces at lists.netlojix.com [mailto:jukebox-list-bounces at lists.netlojix.com] Im Auftrag von Nigel Pugh
Gesendet: Mittwoch, 4. Juli 2007 19:45
An: 'Jukebox mailing list'
Betreff: RE: [Jukebox-list] AMI I200 Scan Control

Hi,

I had the same problem on Ami I's that I restored, and replaced the perished rubber. In England There are pens you can buy, and the bit where you grip the pen with your finger is a tight coloured rubber tube. I removed this from the pen, sliced it down to the same size as the rubber, and slid it over the shaft. Worked perfectly every time. Often, if left unnoticed, the rubber will perish and drop off, and the shaft will wear an indentation into the actual wheel itself, and that compounds the problem of the scan not stopping.

Regards

Nigel, UK

-----Original Message-----
From: jukebox-list-bounces at lists.netlojix.com
[mailto:jukebox-list-bounces at lists.netlojix.com] On Behalf Of dirksenj at bellsouth.net
Sent: 04 July 2007 01:06
To: jukebox-list at lists.netlojix.com
Subject: [Jukebox-list] AMI I200 Scan Control

Hi everyone - I've been working on my newly acquired I200, and have a few problems. After replacing a split gear in the pulse converter, cleaning contacts, and replacing some capacitors, I have the machine selecting properly. However, the record basket won't stop scanning after the last record has been played. I moved all the pins forward on the pop meter, and can barely see that the scan wheel is slipping and does not have enough "oomph" to operate the scan switch. I've never had this apart, and was wondering if I can put more tension on the spring, or do I have to replace the rubber sleeve? Anyone have a source or suggestion for a replacement sleeve? Best way to get it apart? Also, my 12 inch speaker is missing, and the manual only describes it as a low frequency speaker. Is this 16 ohm?
This looks like fun to install. Maybe my 5 year old can crawl inside there.
Thanks for any help you can give.

Jim
_______________________________________________
Jukebox-list mailing list
Jukebox-list at lists.netlojix.com
http://lists.netlojix.com/mailman/listinfo/jukebox-list

_______________________________________________
Jukebox-list mailing list
Jukebox-list at lists.netlojix.com
http://lists.netlojix.com/mailman/listinfo/jukebox-list