[Jukebox-list] Seeburg LS-325

[Ron Rich]

Jim,
  That board probably needs work--did you check the test point voltages?
  As for the selection now playing lamps, that's normal, as it will not switch between the 1 and 2 sides until the mech stops to pick up the opposite side--the switch is controlled by the movement of the pick-up assembly.
  Ron Rich

James McClave <Trollmasters at webtv.net> wrote:
  Ron ,the PCB board you were wondering about in the dcc1 is no.
311125-1. Also , Im not sure if this helps or not , but when the mech
was scanning twice and not playing anything I was observing the digital
selection numbers on the display. They never advanced into the 2xx
series of selections , Just repeated the 1xx series 2 times. Shouldnt
something switch it to the 2xx series at some point in time of the scan
sequence? Jim

E-mail us at: trollmasters at webtv.net

_______________________________________________
Jukebox-list mailing list
Jukebox-list at lists.netlojix.com
http://lists.netlojix.com/mailman/listinfo/jukebox-list


 
---------------------------------
TV dinner still cooling?
Check out "Tonight's Picks" on Yahoo! TV.