[Jukebox-list] repost: Wurlitzer 1900 cabinet rub strips

[Jens Hultgren]

Not reproduced AFAIK but someone should make them...I could use a few
myself.

Can't you turn one upside down and drill new holes? They're slanted on the
end I think but still better than nothing.

I am talking about the lower straight extrusions now. The upper bent ones I
have extras.

There are extrusions at the builder's depots that look ok but not exactly
original out there.


    best, Jens


On 6/28/07, cledus at embarqmail.com <cledus at embarqmail.com> wrote:
>
> I posted this request to the board late last Friday night, probably after
> everyone left for the weekend, as there were very few posts over the
> weekend.
>
> Does anyone have, or know where I can find the extruded aluminum rub
> strips
> that attach to the back edge of the Wurlitzer 1900 cabinet?  I've tried
> Bill
> Butterfield and John Durfee a few months back, with no luck.  Bill had
> two,
> but they were both for the same side (screw hole location determines right
> and left, but a common extrusion).  I don't think these are reproduced.
> Feel free to e-mail me if you have a pair for sale, but do not want to
> post
> in the forum.
>
> Thanks in advance,
> Audie
> cledus at embarqmail.com
>
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>



-- 
"There are three sides to every story. My side, your side, and the truth.
And no one is lying."  Bob Evans