[Jukebox-list] someone verify my OMT wiring pics?

[Pete Bartusek]

Ron, thanks for checking the connections... I did some more digging and I
believe I'm ok on the coil - my problem is the spring is damaged and isn't
pulling the lever hard enough to close the switch to stop the carousel from
turning.

The wiring on the door is a mystery - not sure what most of that is supposed
to go to. A previous owner may have had a dollar bill acceptor in there at
some point.  I'm not sure.. 

I did find that there's evidently a microswitch by the page turn assembly,
but I have no idea what it's for... the page turning mech seems to be
working and stopping ok, unless this microswitch is perhaps there to cut off
power so it won't go to the end of travel?

Everything seems to be almost back on track - except when I start the
machine up in test mode it shows a '10' on the display.  If I adjust k7 so
it's not activating the switch, it goes back to "0" on the display, but if I
turn the machine off and back on at that point (still in test mode), it just
keeps cycling discs to/from the cd player and carousel and flashing 8, so
I'm not sure what to do.  I've read John's Wurlitzer tech tips page about
adjusting k7 to avoid the #8 flashing, but I'm not sure if it reading "10"
is supposed to be the end result, or if it's indicating some other problem.

Pete