[Jukebox-list] Re: AMI Continental problem

[Ron Rich]

Gary,
  Look at the selection pin when you have this problem. I suspect that the pin will not have canceled fully. If that is the case, check the switch ( a Micro on that model--I think) that powers the pin cancel solenoid. You might also check the DC power supply.Ron Rich

Gary Young <gazzyoung_uk at yahoo.co.uk> wrote:
  Hi folks looks like I spoke too soon. I recently wrote
saying I was having problems with B sides being
hesitant to reject on my Ami continental. This was
happening intermitently and only ocassionaly. I freed
up all the pins and thought this had done the trick,
but I now notice that the A sides are starting to do
the same. Any further suggestions as to where to look.
I can get the record to eject eventually by lifting
the tone arm up and passing it over over the record
cut out grooves several times, but noticed a funny
thing...there is no sound when I set the needle back
down at the start of the record. The sound goes back
to normal when the record rejects and goes onto the
next selection. 

Thanks

Gary



___________________________________________________________
Yahoo! Answers - Got a question? Someone out there knows the answer. Try it
now.
http://uk.answers.yahoo.com/ 
_______________________________________________
Jukebox-list mailing list
Jukebox-list at lists.netlojix.com
http://lists.netlojix.com/mailman/listinfo/jukebox-list


 __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com