[Jukebox-list] Re: AMI Continental problem

[Gary Young]

Ron wrote

Gary,
  Look at the selection pin when you have this
problem. I suspect that
 the pin will not have canceled fully. If that is the
case, check the
 switch ( a Micro on that model--I think) that powers
the pin cancel
 solenoid. You might also check the DC power
supply.Ron Rich

Thanks for that Ron, I will have another look at the
pins. Watch and observe, watch and observe. Can these
micro stitches be cleaned with electrical contact
cleaner, or is it the case that when they start going
bad they have to be replaced. If so, can anyone
suggest where I can get replacements.

Thanks for your help

Gary


      ___________________________________________________________ 
Want ideas for reducing your carbon footprint? Visit Yahoo! For Good  http://uk.promotions.yahoo.com/forgood/environment.html