[Jukebox-list] Trashcan is coming together!

[etreble7]

Thanks Bob,
mine is a wood cabinet and the pilasters are installed inside the cabinet 
and that's good because the fit was not, LOL  They look so great, I couldn't 
be happier!!
Jackie

----- Original Message ----- 
From: "Bob Ellingson" <bobe at halted.com>
To: "Jukebox mailing list" <jukebox-list at lists.netlojix.com>
Sent: Wednesday, November 07, 2007 7:39 PM
Subject: Re: [Jukebox-list] Trashcan is coming together!


> At 12:34 PM 11/7/2007 -0500, you wrote:
>
>>I think putting in the Pilasters is not going to be so easy.  The edges of
> the Pilasters cover the screw holes that the Wood Strip should screw into.
> I can't imagine having to make all those holes in the plastic to make it
> fit?  Seems that's a little risky and I would have a good chance to crack
> the plastic?
>
> I seem to recall reading about Dr. Know-it-all's travails when installing
> repro trashcan plastics.  I think he said there is considerable 
> trial-fitting
> and trimming (with a file? I don't know if that material can be "cut" with
> snips or shears or anything...), along with plenty of hair-pulling.  I 
> don't
> know if he was working with the ones that install from the inside, or the
> ones that install from the outside (there are two different mounting 
> schemes,
> depending on the year and whether the cabinet is wood or metal).  Take 
> your
> time, and good luck!
>
>
> --Bob
> =======================================================================
> Bob Ellingson bobe at halted.com
> Halted Specialties Co., Inc. http://www.halted.com
> 3500 Ryder St. (408) 732-1573
> Santa Clara, Calif. 95051  USA (408) 732-6428 (FAX)
>
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list