[Jukebox-list] AMI F-120 Selector Button Question

[Ray Finch]

Although I haven't used it on juke boxes yet, but I have also used model 
airplane glue to hold on buttons that were originally frition fit.  The 
nice thing about model airplane glue is that is drys like super this thick 
rubber or bubble gum so the button is not coming off by itself, but with 
some effort you can still pry it off without damage if you need to. 
Epoxy works well too, but once it's on, it's on to stay.

Ray


On Sun, 25 Nov 2007, Ron Rich wrote:

> I am not 100% sure, but I think that they were "friction fit". I have attached them firmly with "model airplane cement", and also epoxy.   Ron Rich
>
> peshkin at comcast.net wrote:  I just finished the final touches on restoring my AMI F-120. As you may know from my previous posts I am a complete novice, but have managed to slowly complete the task.
>
> I have one selector button that pops out off the flat shaft (that has a hole in it). Can someone tell me how the buton was designed to stay on the shaft? What other than simple pressure hols the button onto the shaft? What is the fix? Thanks. Have a nice remander of the Holiday weekend.
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>
>
>
> ---------------------------------
> Be a better pen pal. Text or chat with friends inside Yahoo! Mail. See how.
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>