[Jukebox-list] Fuse blowing in Wurlitzer 2100?

[Ron Rich]

Berry,
  Hope that you are using a two amp fuse!--Try the following. With the phono switched off, push ALL of the selector pins down, replace the fuse, and turn the power back on--wait a couple of minutes, turn the power off and check to see if the fuse has blown. If it has not blown, turn the power back on, and "release" one pin. If the fuse blows, your problem is in the transfer switch, or scan/transfer motor. Ron Rich 

berry.bell at att.net wrote:
  Hello everyone,

My 2100 just started blowing the 2 amp DC fuse in the amplifier for some reason. This machine has worked flawlessly for over a year. When I replace the fuse and power up, credit is established like it should, but as soon as I make a selection from the keyboard the fuse blows?

This has come out of nowhere. Any initial thoughts?

Most sincerely,
Berry Bell
Elgin, IL
_______________________________________________
Jukebox-list mailing list
Jukebox-list at lists.netlojix.com
http://lists.netlojix.com/mailman/listinfo/jukebox-list


       
---------------------------------
 Check out  the hottest 2008 models today at Yahoo! Autos.