[Jukebox-list] Rockola 1438 Selector Lever Cancel Solenoids

[Britt Abbott]

Be sure to check those wire connections at the cancel solenoid. Could also be that your cancel solenoid is bad. 

>From: James McClave <Trollmasters at webtv.net>
>Date: 2007/10/17 Wed PM 08:00:25 CDT
>To: Jukebox mailing list <jukebox-list at lists.netlojix.com>
>Subject: Re: [Jukebox-list] Rockola 1438 Selector Lever Cancel Solenoids

>Jerry ,  the selector pin cancel solenoids may be mis-aligned . You need
>to see if they are firing at all.  Get the rotating selector arm to stop
>at a selecton where you can visually see if the solenoid "fires" the
>little plunger out. It may be firing, but missing the selector pin, in
>which case you can re-align the Carriage selector with 2 set screws.  If
>the cancel coil is not firing at all, you need to get back to the
>schematic and see makes the cancel solenoids fire, usually  a
>micro-switch or points need cleaned . Jim
>
>E-mail us at: trollmasters at webtv.net
>
>_______________________________________________
>Jukebox-list mailing list
>Jukebox-list at lists.netlojix.com
>http://lists.netlojix.com/mailman/listinfo/jukebox-list