[Jukebox-list] Re: volume control

[N M]

According to the schematics of the amp one of these
volume controls is a easy enough to build. I assume
(we all know what assuming does) it would require a
shielded cable and be limited by length. Using only a
momentary switch and 4 position pot it should be easy
enough. Even though I'm not sure the availability of
the multi-pin connector that would be used to plug
into the amp socket. Does anyone know if these are
available? 

The 101 is old enough that it probably used a wired
volume control as my 222 
does. No motor.Just a wired volume control and reject
button. Not sure when 
the motorized unit was introduced.After the Q or Y
maybe?
 
J.C.
 
 
 
 
In a message dated 9/3/2007 2:09:59 AM Eastern
Daylight Time, 
sleepy_user at yahoo.com writes:

>I was wondering if anyone can give me any insite on a
>remote volume control for a Seeburg 101.  It's got an
>HFMA2 amplifier in it and a dummy plug in the J101
>socket (for remote volume). 

>The service manual doesn't seem to contain any
>information on the proper remote volume control for
>this amp. Atleast I can't seem to find it. 

>The amp doesn't seem to have the room to take the
>motorized pot and the prvc3 control.  I think the
>prvc3 goes back to the STD1... 

>Anyway, I would like to get some part# info if you
>guys have anything. I would like to locate one. 

>Thanks,
>Nick






       
____________________________________________________________________________________
Sick sense of humor? Visit Yahoo! TV's 
Comedy with an Edge to see what's on, when. 
http://tv.yahoo.com/collections/222