[Jukebox-list] remote volume control

[Ron Rich]

Nick,
  The remote VC on those is just an extension of the same pot attached to the amp.The schematic shows how it would be wired, but does not show the value. I believe that Vern Tisdale still has pots for sale --www.verntisdale.com .
  Powered Remote Volume Controls (PRVC) came out with the AYU models, on the SHFA-4 amps. PRVC-1's were not too good, so the PRVC-2 was redesigned as a direct replacement. The PRVC-3 was a further improvement, and will also directly interchange with the earlier models. The PRVC-4 Code A, came out with the introduction of the SPS-2, and will NOT interchange with the earlier models. The PRVC-4 Code B, came out a few years later, and can be used with slight mods in place of the Code A, and vise versa.
  Ron Rich

N M <sleepy_user at yahoo.com> wrote:
  I was wondering if anyone can give me any insite on a
remote volume control for a Seeburg 101. It's got an
HFMA2 amplifier in it and a dummy plug in the J101
socket (for remote volume). 

The service manual doesn't seem to contain any
information on the proper remote volume control for
this amp. Atleast I can't seem to find it. 

The amp doesn't seem to have the room to take the
motorized pot and the prvc3 control. I think the
prvc3 goes back to the STD1... 

Anyway, I would like to get some part# info if you
guys have anything. I would like to locate one. 

Thanks,
Nick



____________________________________________________________________________________
Need a vacation? Get great deals
to amazing places on Yahoo! Travel.
http://travel.yahoo.com/
_______________________________________________
Jukebox-list mailing list
Jukebox-list at lists.netlojix.com
http://lists.netlojix.com/mailman/listinfo/jukebox-list


       
---------------------------------
Be a better Globetrotter. Get better travel answers from someone who knows.
Yahoo! Answers - Check it out.