[Jukebox-list] Re: remote volume control

[Jay Hennigan]

N M wrote:
> Ron,
> I did find the info in a different manual. (I found
> the info on the 161 section that uses the same amp) It
> is calling for a mrvc-3. I did check Vern's site and
> it appears he still has the pot for sale. You mention
> that they are an extension of the same pot attched to
> the amp. The schematics I'm looking at isn't the most
> detailed in the world when refering to the remote vc.
> So, do you recall if the pots are wired in series with
> the remote pot as the primary or if it's a parallel
> setup?  In additon, the remote pots are 0~100% value
> or are preset resistant values (like 1,2,3,4 clicks)?

It's an either/or.  When you plug in the remote volume control, the 
control inside the jukebox is disabled.  It's a conventional 
continuously variable potentiometer.  In a pinch, you could remove the 
internal control and mount it in a suitable enclosure, connect with 
shielded cable.

Unlike with the motorized units, you can only adjust the volume at a 
single location.

--
Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
Impulse Internet Service  -  http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV