[Jukebox-list] making a plastic diffuser for an LPC1.Where to buysign pl...

[Bob E.]

At 11:20 AM 9/16/07 EDT, you wrote:
> 
>Ok. I googled TAP Plastic and found them online. I found the acrylic sheets 
>but I have to buy a 2' x4' piece. The 1/8" thick is $42.
> 
> It might be cheaper to call Bill back and get a good even if it's a little 
>yellowed as they all are by now.
>Maybe that's why no one has discussed this topic before. But am I the only 
>one out there with broken diffuser plastic on my LPC1?  And now I have 2
broken 
>plastics! 
> 
>But maybe I could use the sheet to make one for that Wurlitzer 2150 that has 
>no diffuser.Nothing's cheap about restoring a jukebox these days.

You can go into a TAP plastics store and have them cut plastic to size, 
maybe they will do that for online orders too...but of course while they
will only charge you for the plastic that you actually end up with (I 
presume by the square inch), they will also charge for the cuts...

Did somebody tell you that restoring jukeboxes was a cheap hobby?

--Bob
=======================================================================
Bob Ellingson					bobe at halted.com
Halted Specialties Co., Inc.			http://www.halted.com
3500 Ryder St.					(408) 732-1573
Santa Clara, Calif. 95051  USA			(408) 732-6428 (FAX)