[Jukebox-list] AMI Continental 1 Radar width

[Graeme Harvey]

G'day Adrian,
Glad you got it back together.
Graeme Harvey
----- Original Message ----- 
From: "Juke of Shrewsbury" <jukeofshrewsbury at tiscali.co.uk>
To: "Jukebox mailing list" <jukebox-list at lists.netlojix.com>
Sent: Tuesday, September 25, 2007 6:10 AM
Subject: Re: [Jukebox-list] AMI Continental 1 Radar width


> Thanks Graeme and Doug,
> Mine was 785mm at the top and 778mm at the bottom! It's smaller now - 
> thanks
> to a large sash clamp!
>
> Graeme - I found the assembly sequence you describe by trial and error 
> (lots
> of the latter!) Nice to know I got the right answer in the end.
>
> Thanks again,
>
> Adrian.
> ----- Original Message ----- 
> From: "Graeme Harvey" <gnharvey at hotkey.net.au>
> To: "Jukebox mailing list" <jukebox-list at lists.netlojix.com>
> Sent: Monday, September 24, 2007 10:31 AM
> Subject: Re: [Jukebox-list] AMI Continental 1 Radar width
>
>
> G'day Adrian,
> Doug is correct the measurement is 771 mm.     I have several Continentals
> the 1 & 2 are the same.  I have restored several.     You have the put the
> lighting harness with plugs  in place first. (the rest of the  lights are
> plugged in last)      Then the title holders with light holders.   Then 
> the
> bottom there are two tapered head screws in each bottom corner you put a
> screwdriver through the bottom of the light frame.     Then the top.
> Sounds easy but  it can be frustrating.     You can contact me off list if
> you like.
> Graeme Harvey
> ----- Original Message ----- 
> From: "Doug Duncan" <d_duncan at ntlworld.com>
> To: "Jukebox mailing list" <jukebox-list at lists.netlojix.com>
> Sent: Monday, September 24, 2007 6:46 PM
> Subject: Re: [Jukebox-list] AMI Continental 1 Radar width
>
>
>> Juke of Shrewsbury wrote:
>>> If anyone has a Continental 1, would you be able to measure across the
>>> top of the radar screen, at the maximum width - to the outer edges, and
>>> let me know the distance?
>>> I'm struggling to put one back together here, and there is a suspicion
>>> that the whole radar assembly may be bent. Also, can anyone confirm that
>>> the radar assembly is identical (size wise) on both the Continental 1 
>>> and
>>> the Continental 2 ?
>>>
>>> Thanks!
>>>
>>> Adrian.
>>> _______________________________________________
>>> Jukebox-list mailing list
>>> Jukebox-list at lists.netlojix.com
>>> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>>>
>>>
>>>
>> I've just been and measured my Conti1 which is stored in the garage at 
>> the
>> moment and the width of the radar is 771mm. That is the external
>> measurement at the top.
>>
>> regards,
>>
>> Doug
>>
>>
>> _______________________________________________
>> Jukebox-list mailing list
>> Jukebox-list at lists.netlojix.com
>> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.488 / Virus Database: 269.13.30/1027 - Release Date: 
> 24/09/2007
> 11:27
>
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list