[Jukebox-list] Removing Old Hardened Gaskets

[Bob Ellingson]

At 08:17 PM 4/17/2008 -0400, you wrote:
>Yes , Carl a Seeburg G dome frame , and I got it all off finally. What a
>mess.  Next project Ive already started , a Wurlitzer 1100 , it has the
>upper cabinet foil , metallic gold square pattern. It is also a son-of-a
>gun.  Any ideas on that?  Its almost embedded into the wood its been on
>so long.  Warm soapy water and a putty knife is very time-consuming.
>Most sprays and strippers wont work good as they wont penetrate the
>outer layer , which seems to be actually a thin metal type material.
>Ive even thought of belt -sanding it off . Kinda drastic though.  Jim

Try a heat gun (not a hair dryer, doesn't get hot enough...a real heat gun).

--Bob
=======================================================================
Bob Ellingson					bobe at halted.com
Halted Specialties Co., Inc.			http://www.halted.com
3500 Ryder St.					(408) 732-1573
Santa Clara, Calif. 95051  USA			(408) 732-6428 (FAX)