AW: [Jukebox-list] Wurly 3400 up ??

[Stamann]

Hello Julie,

I'm glad you could fit the new rubbers and that they seem to work well.

I hope you can enjoy the Wurli again along with sweet music and good wine!  :-)

Kind regards  -  Oliver




-----Ursprüngliche Nachricht-----
Von: jukebox-list-bounces at lists.netlojix.com [mailto:jukebox-list-bounces at lists.netlojix.com] Im Auftrag von Julie Mitchell
Gesendet: Dienstag, 19. Februar 2008 04:18
An: Jukebox mailing list
Betreff: Re: [Jukebox-list] Wurly 3400 up ??

Oh ... My ... God.

Somebody please tell me what I was smoking when I decided that buying a jukebox was a good idea.

But seriously, a bit of an ordeal, but everything is back to order.  If anyone else needs to do this, you do not need to take the whole turntable out (oops).  The bolts you are looking for are the ones marked number 30 on page 40C of your Wurli 3700 manual.  Four small ones up top, in front of the turntable and surrounding the motor.  There are also two bolts to remove the cable, located just behind the turntable.

Ron, this is several times you've helped me out now.  Can you please send me your address offline so that I can send you a little something for your time??? (Really, I'd like to.)  Also, to Stamann, I used the longer mounts you sent, and they fit perfectly.  I cranked it up a bit and did not get any interference, so the rubber is .

Now, if you'll excuse me, I need to go have a glass of wine and redo my manicure.

Thank you !!!!!!

Julie





On Feb 15, 2008 11:33 AM, Ron Rich <ronnnrich at yahoo.com> wrote:

> Hi Julie,
>  Yes--I did it--now if only I could remember--CRS you know.
>  As I recall, you must pull the whole "turntable assemb." out. Iin 
> order to do this, there is an "arresting cable" under the assemb., 
> that you can just "unhook" after that, there are two screws on the 
> lever that moves the assemb. left and right, that need to be removed. 
> Then the Nylock nut in the front needs to be removed. After that it's 
> just a matter of laying the whole assemb upside down, on a table, 
> removing the nuts, and old supports, and installing the new ones. 
> There was some sort of bracket that I found "in the way"--or maybe it 
> was the motor itself. (CRS strikes --again). Just be SURE that you 
> mark any "adjustable" screw slots, as to where they were adjusted, and you should be OK.
>  While you are there--oil the top bearing of the motor, and any other 
> "sliding/moving surface", including the "rollers" on the assemb. 
> itself. I suggest that you use a 20wt. ND oil, such as "3 in One MOTOR 
> oil". (NOT "hosehold/multipurpose" oil).
>  Good luck, Ron Rich
>
> Julie Mitchell <julie.mitchell at gmail.com> wrote:
>  Hi Ron,
> Did you figure out the best way to install these? I just got mine in 
> the mail from Stamann and would like to install them.
>
> Thanks,
>
> Julie
>
> On Wed, Jan 9, 2008 at 6:18 PM, Ron Rich wrote:
>
> > Hi All,
> > Has anyone changed the 4 turntable motor grommets in a model 3400, 
> > and up, Wurlitzer?
> > I need to change them in a 1050, and my feeble brain says that I 
> > should be able to do it without removing the turntable assembly. Is 
> > my brain correct, or is it just wishful thinking??
> > Any hints--tips--as you can guess, either I've never done it, or at
> least
> > I can not remember doing it---
> > TIA, Ron Rich
> >
> >
> > ---------------------------------
> > Never miss a thing. Make Yahoo your homepage.
> > _______________________________________________
> > Jukebox-list mailing list
> > Jukebox-list at lists.netlojix.com
> > http://lists.netlojix.com/mailman/listinfo/jukebox-list
> >
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>
>
>
> ---------------------------------
> Never miss a thing.   Make Yahoo your homepage.
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
>
_______________________________________________
Jukebox-list mailing list
Jukebox-list at lists.netlojix.com
http://lists.netlojix.com/mailman/listinfo/jukebox-list