[Jukebox-list] AMI I-200

[Ron Rich]

Jim,
  Most every "H" or "I" that I have worked on does that --more or less. I know that I have eliminated, or reduced it using one or more of the following "tricks". First, be sure that the rectifier in the "power supply" box is wired right. Then check that the 2 amp fuse (which should be) located inside that box, is being held tight, by the clips. Check the routing of the audio cable going to the tone arm--especially as it goes down, and around that "main post". If I remember right, it should wrap around the post at the very bottom, but not with the loom, which should wrap about 2 or 3 inches from the bottom. The audio cable was held in place with black tape, while the loom is allowed to "dangle", or was held on higher by another round of tape.. The audio cable also should have a plastic wire clamp, holding it up, off the cabinet floor between the post and the "leg" of the mechanism. It also seems to me that I had to install another ground wire on some of them, between the
 mechanism and the amp--don't think I ever put it on the AVC unit?---or maybe the mech and the power supply. (CSR is setting in !)
  Ron Rich

dirksenj at bellsouth.net wrote:
  Mine has #47 bulbs in it. All letter buttons are red and all number buttons 
are green.

While on the subject of this model, I have one remaining "glitch" with mine. 
If I select while a record is playing, there is a loud "thump" through the 
speaker when the sprag relay is energized and the selection is punched in. 
This morning I discovered it goes away when I unplug the AVC. The amp and 
AVC unit both have been rebuilt and the sound is great. I've been through 
the pulse converter and replaced all caps. Anyone have a fix for this? I 
really like the AVC action and don't want to leave it unplugged - I'm 
trading a selection thump for the record scratch at the start of the record. 
Thanks,

Jim
----- Original Message ----- 
From: "The Roths" 
To: "Jukebox mailing list" 
Sent: Tuesday, January 01, 2008 8:26 AM
Subject: [Jukebox-list] AMI I-200


>I am prepping an AMI I-200 for sale and have a couple of questions.
>
>
>
> 1. What is the correct light bulb for the credit and wait to select
> lights?
>
>
>
> 2. What is the correct color of the selection keys? The letter keys
> are all red. Number keys 1-17 are green. Number 18 is blue. Numbers 19
> and 20 are red. Were the number keys all supposed to be green and 
> somebody
> swapped in a couple of wrong colors to make a set or does it have 
> something
> to do with the dual credit arrangement.
>
>
>
> Any information is appreciated.
>
>
>
> Brian
>
> _______________________________________________
> Jukebox-list mailing list
> Jukebox-list at lists.netlojix.com
> http://lists.netlojix.com/mailman/listinfo/jukebox-list
> 


_______________________________________________
Jukebox-list mailing list
Jukebox-list at lists.netlojix.com
http://lists.netlojix.com/mailman/listinfo/jukebox-list


       
---------------------------------
Never miss a thing.   Make Yahoo your homepage.