[Jukebox-list] Pinbank contact block, was: So, dats howcome !!

[Ron Rich]

Jay,
   --according to him "--it PUTS selections ON  the "Tormat" AND takes them OFF--"
  $49 is cheap for anything THAT magical !!! (but a little high for a non-magical one).
  (BTW, I have fixed broken "legs" on those real fast and easy with "JB Quick Weld" epoxy--works great.)
  Ron Rich

Jay Hennigan <jay at west.net> wrote:
  Ron Rich wrote:
> Jackie You are right it should be 270199385482--sorry all ! Ron Rich

Well he has "Tormat" wrong, as this was what was used pre-Tormat. Out 
of several B-C-G-W-R-J jukes I've had one occasion where the bakelite 
contact block had one of the four guide feet break off. Some quality 
epoxy and cleaning the gunk out of the pinbank rails so it would slide, 
and it's been very happy since.

But, if you need one, 49 bucks may be worth it. I don't think they're 
being reproduced. (If so, nylon might be a better choice of material.) 
$8.75 for shipping seems a bit steep, it could probably go first class 
mail for under two bucks. A bit of patience and you could probably get 
a whole parts mech for $49.

--
Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
Impulse Internet Service - http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV
_______________________________________________
Jukebox-list mailing list
Jukebox-list at lists.netlojix.com
http://lists.netlojix.com/mailman/listinfo/jukebox-list


       
---------------------------------
Never miss a thing.   Make Yahoo your homepage.